Epson photo 1400 printer how to fix vertical banding

Epson photo 1400 printer how to fix vertical banding software#

Your printer software CD-ROM includes an electronic Reference Guide for your printer. It can be harmful to your printer if you turn the printer off using an external switch. Never use an external switch, such as a power strip, surge protector, or power protector, to turn off the printer, as the print heads will not be in the proper position. Wait until the printer stops printing and use the printer's power button. What is the proper way to turn off the printer? The printer can be networked using the optional EpsonNet 10/100 Based-TX external Ethernet print server from Epson. What do I need to do to print with this printer on a network?

The printer comes with a built in IEEE-1284 parallel port and USB port. Which interfaces does the printer support? The printer prints one page showing its ROM version number, ink counter, and a nozzle check pattern. Continue holding down the Maintenance button until the Power light starts to flash, then release it. Hold down the Maintenance button, then press and release the Power button. Make sure letter-size or larger paper is loaded in the printer. Then disconnect the interface cable from the printer. Printer's Nozzle Check Pattern - Make sure both the printer and computer are turned off. When the cleaning cycle is complete, the power light will stop flashing. Cleaning takes about 30 seconds, during which the printer makes some noise and the power light flashes. Press and hold the maintenance button for three seconds. Cleaning Cycle - Make sure the printer is turned on but not printing, and the maintenance lights are off.

Epson photo 1400 printer how to fix vertical banding